METTLER TOLEDO’s range of axle weighing solutions are engineered to suit a variety of vehicle weighing requirements, from single axle weighing through to dual, tri or even quad axles. Each solution has been designed to capture and accumulate data accurately and efficiently to assist with Chain of Responsibility compliance.
AxlePass™ Weigh-in-Motion Axle Weighbridge
Weigh more vehicles in less time with a AxlePass™ weigh-in-motion weighbridge. This economical solution captures axle and gross weights of vehicles moving at speeds of up to 10 km/h. By eliminating the need to stop each vehicle, an AxlePass™ weighbridge weighs the same number of vehicles as five static scales, in a fraction of the time and at a fraction of the cost. AxlePass™ can deliver in-motion weighing accuracy within 1.0% of the true weight.
Roll On Weigh-in-Motion Axle Weighbridge
The unique design of METTLER TOLEDO’s Roll On Weigh-in-Motion Axle Weighing solution can be installed without expensive concrete foundations, considerably reducing your construction costs. The in-ground design makes it easy for vehicles to enter and exit the axle weighbridge without stopping, traveling at a constant speed of less than 25 km/h.
In-Ground Axle Weighbridge
The in-ground axle weighing solution from METTLER TOLEDO enables bi-directional entry for easy and efficient vehicle weighing. The structure includes the unequalled reliability of POWERCELL PDX load cells. With their robust, stainless steel construction, POWERCELL PDX load cells provide 100% protection against the forces that can eat into your profits, including extreme temperatures, lightening strikes, water and floods, rodents, and rust and corrosion.
Multi-Deck Axle Weighbridge
METTLER TOLEDO’s multi-deck axle weighbridge uses multiple independent weighing modules to simultaneously calculate a vehicle’s total gross weight, providing accurate data fast without repositioning the vehicle. By calculating the weight of each axle group, the weighbridge can assist your company with Chain of Responsibility compliance.
The multi-deck weighbridge comes with either a steel or concrete deck and features orthropic ribs and POWERCELL PDX load cells to provide many years of accurate and reliable weighing.
Multi-Deck Axle Weighbridge
Feature | Specification | ||
Deck construction | Reinforced concrete or steel construction | ||
Weighbridge width (standard) | 3 m, 3.4 m | ||
Weighbridge length | 4 m to 50 m + | ||
Lightning protection (tested) | Lightning Technologies tested - 100 000v, 80 000 A (POWERCELL PDX) | ||
Weighing components | Stainless Steel | ||
Load cells | Hi-performance POWERCELL PDX | ||
Load cell protection class | IP68, IP69k; NEMA 6p | ||
Capacity | 30/50/60/80/100 t | ||
Maximum rated axle load | 23.5 t tri axle over 1.2 m axle spacing | ||
Operating temperature | -60° c to + 50° c (-76° F to 122° F) | ||
Temperature EC/94/EEC | -10° c to + 40° c (4° F to 104° F) | ||
Side rails | Above ground solutions only | ||
Easy access to load cells | Yes | ||
Unmanned operation | Driver Control Station (DCS) |
Weigh-in-Motion Axle Weighbridge
Feature | Specification | ||
Deck construction | Steel construction | ||
Weighbridge width (standard) | 3.2 m | ||
Weighbridge length | 0.8 m | ||
Weighing components | Stainless Steel | ||
Load cell protection class | IP68, IP69k; NEMA 6p | ||
Capacity | 30/50/60/80/100 t | ||
Maximum rated axle load | 23.5 t tri axle over 1.2 m axle spacing | ||
Operating temperature | -60° c to + 50° c (-76° F to 122° F) | ||
Temperature EC/94/EEC | -10° c to + 40° c (4° F to 104° F) | ||
Side rails | Above ground solutions only | ||
Easy access to load cells | Yes | ||
Unmanned operation | Driver Control Station (DCS) |
In-Ground Axle Weighbridge
Feature | Specification | ||
Deck construction | Reinforced concrete or steel construction | ||
Weighbridge width (standard) | 3 m, 3.4 m | ||
Weighbridge length | 4.8 m to 50 m + | ||
Lightning protection (tested) | Lightning Technologies tested - 100 000v, 80 000 A (POWERCELL PDX) | ||
Weighing components | Stainless Steel | ||
Load cells | Hi-performance POWERCELL® PDX® | ||
Load cell protection class | IP68, IP69k; NEMA 6p | ||
Capacity | 30/50/60/80/100 t | ||
Maximum rated axle load | 23.5 t tri axle over 1.2 m axle spacing | ||
Operating temperature | -60° c to + 50° c (-76° F to 122° F) | ||
Temperature EC/94/EEC | -10° c to + 40° c (4° F to 104° F) | ||
Easy access to load cells | Yes | ||
Unmanned operation | Driver Control Station (DCS) |